Fiber proof testers are created to use a set load to Optical Fiber Ribbon Machine in order to evaluate the potency of the spliced Fiber. Our Fiber proof testers can be purchased in both linear and rotary designs, for both proof and stress screening. Fiber proof testers are available for solitary setting, multimode, and polarization-sustaining fibers. Pick from devoted, stand alone techniques or multi-purpose styles which are also competent at stripping, cleansing, cleaving, splicing, and recoating.
Fiber Recoaters with Proof Testers provide simple, integrated answers to recoat and test fusion-spliced materials. The Fiber recoating process restores the barrier covering to your removed Fiber, providing much more versatility than a warmth-shrink safety sleeve, enabling that it is dealt with and coiled without damaging the fusion-spliced section. The integrated linear or rotary Proof tester allows customers to immediately check a recoated Fiber using a pre-determined load and determine the long-phrase longevity of the Fiber. Because of their ability to recover a fusion-spliced Fiber to close to initial condition, these systems are perfect for applications like undersea optical Fiber cables, submarine communication wiring, Fiber lasers, or Dispersed Bragg Reflector (DBR) lasers.
This process starts off with the combination-spliced section of Fiber being positioned in the middle of the mold assembly (see picture to the right). Once set constantly in place, inserts in the Fiber obstructs safe the spliced Fiber in position. Recoat material is motivated to the cavity and then Ultra violet-treated. The recoated Fiber can then be tested by pulling into it up to and including pre-determined weight.
Recoater and Mold Assembly Choices – Recoaters can be found with either a computerized or handbook mold assembly. The automatic mold set up functions pneumatic control of the mold plates and is also optimized for high-volume manufacturing programs. Manual mold assemblies, on the other hand, use hinged mold plates that offer more versatility and are perfect for reduced-volume production or RAndD programs. An automated or handbook volumetric dispensing pump and injection product is employed to inject the recoat materials to the mold cavity.
The Optical Fiber Ribbon Machine comes regular using a mold assembly for Ø430 µm covered fibers; For our manual recoaters (Product #s PTR206, PTR206B, PTR307, and PTR307B), the mold set up comes separately in order that clients can choose the right mold coating size for their program. Custom mold covering dimensions can be found as much as Ø900 µm. Pre-installing of the mold assembly in the manufacturer can also be available. Get in touch with Tech Assistance for additional info on custom molds or factory set up.
We provide you with both higher-directory (Product # AB950200) and reduced-directory (Item # PC373) recoat materials to be used during these recoaters. Recoaters with manual injection pumping systems (Item #s PTR206B and PTR307B) are compatible with each varieties of recoat materials; all other recoaters are compatible with the high-index materials only. Our handbook recoaters with the automated injection program (Item #s PTR206 and PTR307) can be customized to work with both reduced- and high-index recoat materials; make sure you get in touch with Technology Support for more information.
Proof Tester Options – The PTR206, PTR206B, and PTR208 Fiber Recoaters include an incorporated linear Proof tester, that can take the Fiber as much as a predetermined weight (20 N) and then releases it. The linear Proof tester uses the same Fiber holding obstructs as the recoater and thus the Fiber will not need to be moved just before screening. The PTR307 and PTR307B Fiber Recoaters come with an integrated rotary Proof tester, which can perform each Proof and stress assessments (?89 N). One set of Proof test grips is included; replacement Proof test grips can be purchased below in packs of 10. Each screening procedure is fully programmable using the provided handset or tablet controller, enabling qyjflh consumer to choose guidelines including the weight, the pace in which the stress is applied, and the hold time.
Inserts for Fiber Keeping Obstructs – As well as the above, we provide you with a variety of inserts for use within the Fiber keeping blocks from the recoaters in order to back up a wide range of Optical Fiber Ribbon Machine coating diameters. For recoaters using a rotary Proof tester, the inserts are compatible with Fiber coating diameters in a range from 125 µm to 900 µm. For recoaters having a linear Proof tester, the inserts include a range for Fiber coatings from Ø250 µm to Ø900 µm.